Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Molex Microfit+ Power and CAN Cable - 6in
REV-11-8020€6,01The Molex MicroFit+ Power and CAN Cable is the dedicated replacement and accessory cable for the MAXSpline Through Bore Encoder. It provides both power and CAN connectivity through a compact, secure... -
Digital LED Indicator - Red/Green - 4 Pack
REV-31-2010-PK4€14,76The Digital LED Indicator is a LED signal module that is digitally controlled (active low) and offers three colors: red, green, and amber. The Digital LED Indicator is designed to directly interface... -
Touch Sensor
REV-31-1425€8,76Touch sensor is best used for user input, but can also be used as a limit switch. Configuration The REV Touch Sensor is a digital sensor that is wired to the N+1 channel on our standard 4-pin JST PH... -
MAXSwerve Spare Parts
€2,75 - €32,03These spare parts are designed specifically to self service and maintain your 3in MAXSwerve Module (REV-21-3005). Created for efficient repairs and upkeep, routinely servicing your 3in MAXSwerve... -
-
MAXPlanetary Input Couplers
€8,76 - €10,01These MAXPlanetary Input Couplers are compatible with the REV ION System. The MAXPlanetary 1/2in Hex Input Coupler (REV-21-2110) attaches to the end of a hex shaft, securely held in place by a screw,... -
36in CAN Extension Cable - 5 Pack
REV-21-2052-PK5€12,51The 36in CAN Extension Cable is a 3-pin connector to interface with existing CAN devices. Specifications Length: 36in (3ft) Wire Colors: yellow, green 22 AWG -
JST PH 6-pin Breakout Board - 4 Pack
REV-11-1276-PK4€8,26This JST-PH 6-pin Breakout Board is designed to adapt external sensors to the SPARK MAX 6-pin Encoder Port standard. It features a JST PH 6-pin connector, labeled solder pads, and through-hole pads... -
PWM Cable Clip - 10 Pack
REV-11-1229-PK10€6,01These plastic clips are designed to keep standard 0.1" 3-pin PWM connectors together. Simply clip them around an assembled pair of connectors. -
#10-32 Button Head Hex Drive Screws
€4,50 - €12,01Steel hardware of the appropriate size to work with the REV ION System. Length measured from tip to underside of screw head. Documentation ION Build System Guide -
#10-32 Socket Head Screws
€4,50 - €32,53Steel hardware of the appropriate size to work with the REV ION System. Length measured from tip to underside of screw head. Documentation ION Build System Guide -
MAXTube Internal Supports
€19,52 - €26,03MAXTube Internal Supports are compatible with the REV ION System and facilitate bolt-through assembly within a MAXTube without causing permanent deformation. Crucial for ensuring structurally sound... -
8mm Keyed Shaft Retaining Hardware Pack
REV-21-2907€2,25Commonly included with our gearboxes and pinion options, the 8mm Keyed Shaft Retaining Hardware Pack is compatible with the REV ION System and includes the hardware needed to retain 2mm keyed... -
ION Motor Mounting Blocks
€32,03The ION Motor Mounting Blocks family offers two options for securely mounting motors and supporting extended shafts within robot mechanisms. Both versions use aluminum plates with integrated... -
4in Spiky Wheel - Tread - 8 Pack
REV-21-4419-PK8€32,03The 4in Spiky Wheel Tread 8 Pack provides replacement treads for teams using the 4in Spiky Wheels on their EasySwerve-equipped robots. These injection molded TPU treads feature an aggressive spiked... -
8mm Shaft Spacer - 1/16in - Plain - 50 Pack
REV-21-4483-PK50€9,01The 8mm Shaft Spacer is a stainless steel 1/16 inch washer designed for precise shaft spacing in FRC and FTC mechanisms. Used on the NEO 2.0 Brushless Motor to achieve correct input coupler alignment... -
4in Spiky Wheel - Aluminum Hub
REV-21-4418€30,03The 4in Spiky Wheel Aluminum Hub is a precision machined and balanced wheel hub designed for use with the 4in Spiky Wheel system and the 4in EasySwerve Module. Built from 6061 aluminum, this hub... -
MAXPlanetary Universal Input Stage V2
REV-21-2146€12,01The MAXPlanetary Universal Input Stage V2 is a redesigned mounting solution for integrating a wide range of FRC motors into the MAXPlanetary System. Built as the next evolution of the original... -
NEO 2.0 Sensor Cable
REV-11-1287€5,01The NEO 2.0 Sensor Cable connects the NEO 2.0 Brushless Motor’s sensor port to a standard JST PH 6-pin interface used on REV motor controllers. The 2x3-pin PHSD connector provides a secure, latching... -
ION MAXSpline Shaft Collars
€6,01 - €7,26MAXSpline Shaft Collars provide mechanical retention for components mounted on MAXSpline Shaft and use a two piece aluminum clamping design for secure attachment. Both versions are black anodized for...