Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
MAXSpline Encoder
REV-11-9008341,86złThe MAXSpline Encoder delivers high accuracy and robust performance while integrating seamlessly with the MAXSpline ecosystem. Using the same proven magnetic sensing architecture as the Through Bore... -
4-pin JST PH to 4-pin roboRIO I2C Cable
REV-11-172917,12złThis 4-pin JST PH to 4-pin roboRIO I2C Cable is designed to connect REV I2C sensors, like the REV Color Sensor V3, to the I2C port on the NI roboRIO for use in the FIRST Robotics Competition. Each... -
12V RGB LED Strip - 5m
REV-11-1197122,86złThis 12V RGB LED Strip is compatible with the REV Blinkin LED Driver (REV-11-1105). Each LED on the strip is wired in parallel and actually contains three embedded LEDs; a red, green, and blue LED... -
JST Joiner Boards
25,66zł - 41,67złThe JST PH 6-pin Joiner Boards (REV-11-1277-PK4) are intended to be used with the JST PH 6-pin Extension Cables to extend the reach of your NEO Brushless Motor sensor cables. The JST VH 2-pin Joiner... -
Encoder Adapters
47,00zł - 53,41złAbsolute Encoder Adapter (REV-11-3326) connects the REV Through Bore Encoder directly to the SPARK MAX Data Port. This adapter connects the Absolute Duty Cycle output of the Through Bore Encoder to... -
Molex Microfit+ Power and CAN Cable - 6in
REV-11-802025,66złThe Molex MicroFit+ Power and CAN Cable is the dedicated replacement and accessory cable for the MAXSpline Through Bore Encoder. It provides both power and CAN connectivity through a compact, secure... -
Digital LED Indicator - Red/Green - 4 Pack
REV-31-2010-PK463,01złThe Digital LED Indicator is a LED signal module that is digitally controlled (active low) and offers three colors: red, green, and amber. The Digital LED Indicator is designed to directly interface... -
Touch Sensor
REV-31-142537,40złTouch sensor is best used for user input, but can also be used as a limit switch. Configuration The REV Touch Sensor is a digital sensor that is wired to the N+1 channel on our standard 4-pin JST PH... -
JST PH 6-pin Breakout Board - 4 Pack
REV-11-1276-PK435,26złThis JST-PH 6-pin Breakout Board is designed to adapt external sensors to the SPARK MAX 6-pin Encoder Port standard. It features a JST PH 6-pin connector, labeled solder pads, and through-hole pads... -
Through Bore Encoder V2
REV-11-3174205,13złThe REV Through Bore Encoder V2 provides precise, reliable shaft position measurement with both incremental (ABI quadrature) and absolute (pulse-width) outputs. Its ½" hex through bore mounts easily... -
SPARK MAX Data Port Breakout Board
REV-11-127847,00złThe SPARK MAX Data Port Breakout Board makes it easy to connect external sensors to the SPARK MAX Data Port. For additional information on the SPARK MAX Data Port, please take a look at the SPARK MAX... -
Blinkin LED Driver
REV-11-1105212,30złNow legal for both FTC and FRC! Blinkin makes adding LEDs to your robot as simple as driving a motor. Chose the pattern you want and give it the corresponding PWM signal. The Blinkin LED Driver is a... -
2m Distance Sensor
REV-31-1505134,60złThe REV Robotics 2m Distance Sensor uses the ST Microelectronics VL53L0X Time-of-Flight (ToF) laser-ranging module to measure distances up to 2 meters with millimeter resolution. Unlike other ranging... -
Through Bore Encoder V1
REV-11-1271205,13zł174,35złThe REV Through Bore Encoder is specifically designed with the end user in mind, allowing teams to place sensors in the locations closest to the rotation that they wish to measure. This rotary sensor... -
4-Pin JST to PWM Sensor Adapter Cable - 2 Pack
REV-11-1292-PK219,21złThe REV 4-Pin JST to PWM Sensor Adapter Cable allows for seamless connection of REV Robotics Sensors like the Magnetic Limit Switch and Potentiometer to the FRC Control System. Please note that this... -
5V Addressable LED Strip - 1m
REV-11-1198111,12złThis 5V WS2812B Addressable RGB LED Strip is compatible with the REV Blinkin LED Driver (REV-11-1105). Each LED contains an integrated driver IC and three LEDs; a red, green, and blue LED. Each... -
Magnetic Limit Switch
REV-31-146274,79złThe REV Robotics Magnetic Limit Switch is a three-sided active-low digital hall effect switch with three internal hall effect elements located on the top and sides of the sensor. The three elements... -
Through Bore Encoder Insert Pack
REV-25-187017,08złThese are the same inserts that are included with the Through Bore Encoder. Specifications Weight(s): 3/8in Hex: 23.5g (0.051lbs) 5mm Hex: 24.0g (0.052lbs) 1/4in Round: 24.0g (0.052lbs) Kit... -
Analog Pressure Sensor
REV-11-1107168,45złThe REV Robotics Analog Pressure Sensor is a 5V sensor that can measure pressures up to 200 PSI. It outputs an analog voltage that is proportional to the measured pressure and can plug directly into... -
Blinkin LED Cable Adapter
REV-11-119617,08złThis cable is for use with the Blinkin LED Driver. This cable converts the JST PH 7-pin connector on the Blinkin' LED Driver module to a males 3-pin JST SM and male 4-pin JST SM connectors for...