Touch sensor is best used for user input, but can also be used as a limit switch.  Configuration The REV Touch Sensor is a digital sensor that is wired to the N+1 channel on our standard 4-pin JST PH connector. In other words, the REV Expansion Hub...

These spare parts are designed specifically to self service and maintain your 3in MAXSwerve Module (REV-21-3005). Created for efficient repairs and upkeep, routinely servicing your 3in MAXSwerve Module with spare parts will enhance performance and...

The Stepped Bushing - 3/4in ID is compatible with the REV ION System. This bushing used in conjunction with the MAXSpline Shaft and Dead Axle Tube - 3/4in can be used to build robust and effective rollers and intakes. Specifications ...

These MAXPlanetary Input Couplers are compatible with the REV ION System. The MAXPlanetary 1/2in Hex Input Coupler (REV-21-2110) attaches to the end of a hex shaft, securely held in place by a screw, enabling the MAXPlanetary to be powered by a hex shaft...

The 36in CAN Extension Cable is a 3-pin connector to interface with existing CAN devices.  Specifications Length: 36in (3ft) Wire Colors: yellow, green 22 AWG

This JST-PH 6-pin Breakout Board is designed to adapt external sensors to the SPARK MAX 6-pin Encoder Port standard. It features a JST PH 6-pin connector, labeled solder pads, and through-hole pads that are compatible with popular 63R style quadrature...

These plastic clips are designed to keep standard 0.1" 3-pin PWM connectors together. Simply clip them around an assembled pair of connectors.

Steel hardware of the appropriate size to work with the REV ION System. Length measured from tip to underside of screw head. Documentation ION Build System Guide Hardware Basics Onshape Application Examples Product Options  SKU ...

Steel hardware of the appropriate size to work with the REV ION System. Length measured from tip to underside of screw head. Documentation ION Build System Guide Hardware Basics Onshape Application Examples Product Options  SKU ...

MAXTube Internal Supports are compatible with the REV ION System and facilitate bolt-through assembly within a MAXTube without causing permanent deformation. Crucial for ensuring structurally sound through-bolted joints and allows multiple supports to be...

Commonly included with our gearboxes and pinion options, the 8mm Keyed Shaft Retaining Hardware Pack is compatible with the REV ION System and includes the hardware needed to retain 2mm keyed elements to 8mm OD shafts without the bulk of alternative...

The ION Motor Mounting Blocks family offers two options for securely mounting motors and supporting extended shafts within robot mechanisms. Both versions use aluminum plates with integrated MAXSpline bores and bearing pockets, providing a consistent...

The 4in Spiky Wheel Tread 8 Pack provides replacement treads for teams using the 4in Spiky Wheels on their EasySwerve-equipped robots. These injection molded TPU treads feature an aggressive spiked geometry designed to maximize traction on FRC carpet...

The 8mm Shaft Spacer is a stainless steel 1/16 inch washer designed for precise shaft spacing in FRC and FTC mechanisms. Used on the NEO 2.0 Brushless Motor to achieve correct input coupler alignment in MAXPlanetary assemblies, this spacer also fits any...

The 4in Spiky Wheel Aluminum Hub is a precision machined and balanced wheel hub designed for use with the 4in Spiky Wheel system and the 4in EasySwerve Module. Built from 6061 aluminum, this hub provides a strong and reliable foundation for high-traction...

The MAXPlanetary Universal Input Stage V2 is a redesigned mounting solution for integrating a wide range of FRC motors into the MAXPlanetary System. Built as the next evolution of the original universal input stage, V2 enhances strength, expands motor...

The NEO 2.0 Sensor Cable connects the NEO 2.0 Brushless Motor’s sensor port to a standard JST PH 6-pin interface used on REV motor controllers. The 2x3-pin PHSD connector provides a secure, latching connection at the motor, while the 6-pin JST PH...

MAXSpline Shaft Collars provide mechanical retention for components mounted on MAXSpline Shaft and use a two piece aluminum clamping design for secure attachment. Both versions are black anodized for durability and integrate cleanly within the REV ION...

The ION Round Belt System provides a simple and adaptable way to transfer power in compact robot mechanisms. Designed around a 2in outer diameter when the belt is installed, the system stays on pitch with the REV ION wheel lineup, making it easy to...

The ION Conveyor Brush System is a customizable solution for creating wide to narrow intake brushes that adapt to a variety of game pieces. The 24in brush can be cut to any length using a bandsaw or hacksaw, allowing teams to fine tune coverage and...