Description
Designed for teams requiring higher load capacity in chain-driven systems, the ION #35 Sprockets come in three versatile options, each compatible with the REV ION Build System:
- #35 Hub Sprockets - 1/2in Hex: Featuring a 1/2in hex bore (rounded for the 9T size) and dual raised hubs for centered alignment on a 0.5in width, these sprockets are ideal for compact spaces. The 1/2in hex bore enables the smallest sprockets with the fewest teeth, accommodating a wider range of reduction options. Our smallest sprockets are made from steel to ensure they withstand rigorous demands.
- #35 Hub Sprockets - MAXSpline: Incorporating a MAXSpline bore, these sprockets support both increased torque transfer and free rotation through the use of bearings. MAXSpline bores provide versatility, accommodating MAXSpline Shafts, flanged bearings, or MAXHubs. Dual raised hubs ensure consistent spacing and adequate chain clearance.
- #35 Billet Sprockets: Engineered for durability, these sprockets feature integrated stiffening ribs to prevent buckling under heavy loads. Billet sprockets include a standard 2-inch bolt circle, patterned radially for #10-32 screws with integrated nut capture pockets for compatibility within the REV ION Build System. The MAXSpline bore and MAXTube mounting pattern allow direct integration with structural components while enhancing torque transfer.
The ION #35 Sprockets perform best with tensioners or clamping blocks to maintain proper chain tension and feature alignment notches. All sprockets are designed for seamless integration into the REV ION system, delivering reliable performance in demanding robotics applications.
Features
- #35 Hub Sprockets - 1/2in Hex
- Single piece machined construction
- Integrated spacer for system compatibility
- Compatible with 1/2in Rounded Hex Shafts
- #35 Hub Sprockets - MAXSpline
- Single piece machined construction
- Integrated spacer for system compatibility
- Compatible with MAXHubs and MAXSpline Shaft
- #35 Billet Sprockets
- Single piece machined construction
- Integrated stiffening and weight reduction geometry
- Integrated spacer for easy mounting to MAXTube
- Compatible with MAXHubs and MAXSpline Shaft
- Integrated nut capture pockets
Specifications
- #35 Hub Sprockets - 1/2in Hex - General Specs:
- Pitch: 9.53mm (0.375in)
- Total Hub Width: 12.7mm (0.5in)
- #35 Hub Sprockets - 1/2in Hex - 9T
- Pitch Diameter: 27.8mm (1.1in)
- OD: 32.6mm (1.28in)
- Bore: 1/2in Rounded Hex
- Material: Steel
- Weight: 19.22g (0.04lbs)
- #35 Hub Sprockets - 1/2in Hex - 10T
- Pitch Diameter: 30.8mm (1.21in)
- OD: 35.7mm (1.41in)
- Bore: 1/2in Hex
- Material: Steel
- Weight: 26.13g (0.06lbs)
- #35 Hub Sprockets - 1/2in Hex - 11T
- Pitch Diameter: 33.8mm (1.33in)
- OD: 38.8mm (1.53in)
- Bore: 1/2in Hex
- Material: Steel
- Weight: 31.28g (0.07lbs)
- #35 Hub Sprockets - 1/2in Hex - 12T
- Pitch Diameter: 36.8mm (1.45in)
- OD: 41.8mm (1.65in)
- Bore: 1/2in Hex
- Material: Steel
- Weight: 36.91g (0.08lbs)
- #35 Hub Sprockets - 1/2in Hex - 16T
- Pitch Diameter: 48.8mm (1.92in)
- OD: 54mm (2.13in)
- Bore: 1/2in Hex
- Material: Aluminum 6061
- Weight: 22.3g (0.05lbs)
- #35 Hub Sprockets - 1/2in Hex - 18T
- Pitch Diameter: 54.9mm (2.16in)
- OD: 60.1mm (2.36in)
- Bore: 1/2in Hex
- Material: Aluminum 6061
- Weight: 28.22g (0.06lbs)
- #35 Hub Sprockets - 1/2in Hex - 20T
- Pitch Diameter: 60.9mm (2.4in)
- OD: 66.1mm (2.6in)
- Bore: 1/2in Hex
- Material: Aluminum 6061
- Weight: 34.88g (0.08lbs)
- #35 Hub Sprockets - 1/2in Hex - 24T
- Pitch Diameter: 73mm (2.87in)
- OD: 78.3mm (3.08in)
- Bore: 1/2in Hex
- Material: Aluminum 6061
- Weight: 50.43g (0.11lbs)
- #35 Hub Sprockets - MAXSpline - General Specs:
- Pitch: 9.53mm (0.375in)
- Total Hub Width: 12.7mm (0.5in)
- Bore: MAXSpline
- Material: Aluminum 6061
- #35 Hub Sprocket - MAXSpline - 16T
- Pitch Diameter: 48.8mm (1.92in)
- OD: 54mm (2.13in)
- Weight: 17.87g (0.04lbs)
- #35 Hub Sprocket - MAXSpline - 18T
- Pitch Diameter: 54.9mm (2.16in)
- OD: 60.1mm (2.36in)
- Weight: 23.87g (0.05lbs)
- #35 Hub Sprocket - MAXSpline - 20T
- Pitch Diameter: 60.9mm (2.40in)
- OD: 66.1mm (2.60in)
- Weight: 30.53g (0.07lbs)
- #35 Hub Sprocket - MAXSpline - 24T
- Pitch Diameter: 73mm (2.87in)
- OD: 78.3mm (3.08in)
- Weight: 46.09g (0.10lbs)
- #35 Billet Sprockets - General Specs:
- Pitch: 9.53mm (0.375in)
- Total Hub Width: 12.7mm (0.5in)
- Bore: MAXSpline
- Material: Aluminum 6061
- #35 Billet Sprocket - 28T
- Pitch Diameter: 85.1mm (3.35in)
- OD: 90.4mm (3.56in)
- Weight: 82g (0.18lbs)
- #35 Billet Sprocket - 32T
- Pitch Diameter: 97.2mm (3.83in)
- OD: 102.6mm (4.04in)
- Weight: 99g (0.22lbs)
- #35 Billet Sprocket - 36T
- Pitch Diameter: 109.3mm (4.30in)
- OD: 114.7mm (4.52in)
- Weight: 116g (0.26lbs)
- #35 Billet Sprocket - 40T
- Pitch Diameter: 121.4mm (4.78in)
- OD: 126.8mm (4.99in)
- Weight: 135g (0.30lbs)
- #35 Billet Sprocket - 44T
- Pitch Diameter: 133.5mm (5.26in)
- OD: 139mm (5.47in)
- Weight: 139g (0.31lbs)
- #35 Billet Sprocket - 48T
- Pitch Diameter: 145.6mm (5.73in)
- OD: 151.1mm (5.95in)
- Weight: 152g (0.34lbs)
- #35 Billet Sprocket - 52T
- Pitch Diameter: 157.8mm (6.21in)
- OD: 163.2mm (6.43in)
- Weight: 165g (0.36lbs)
- #35 Billet Sprocket - 56T
- Pitch Diameter: 169.9mm (6.69in)
- OD: 175.4mm (6.90in)
- Weight: 179g (0.40lbs)
- #35 Billet Sprocket - 60T
- Pitch Diameter: 182mm (7.17in)
- OD: 187.5mm (7.38in)
- Weight: 192g (0.42lbs)
- #35 Billet Sprocket - 64T
- Pitch Diameter: 194.1mm (7.64in)
- OD: 199.6mm (7.86in)
- Weight: 206g (0.45lbs)
- #35 Billet Sprocket - 68T
- Pitch Diameter: 206.2mm (8.12in)
- OD: 211.8mm (8.34in)
- Weight: 219g (0.48lbs)
- #35 Billet Sprocket - 72T
- Pitch Diameter: 218.4mm (8.6in)
- OD: 223.9mm (8.81in)
- Weight: 233g (0.51lbs)
- #35 Billet Sprocket - 76T
- Pitch Diameter: 230.5mm (9.07in)
- OD: 236mm (9.29in)
- Weight: 247g (0.54lbs)
- #35 Billet Sprocket - 80T
- Pitch Diameter: 242.6mm (9.55in)
- OD: 248.2mm (9.77in)
- Weight: 259g (0.57lbs)
Documentation
- ION Build System Guide
- Introduction to Motion
- Sprocket and Chain User Guide
- Onshape Application Examples
Product Options
| SKU | PRODUCT NAME | CAD & DRAWINGS |
| REV-21-3706 | #35 Hub Sprocket - 1/2in Hex - 9T | STEP FILE ONSHAPE DRAWING |
| REV-21-3707 | #35 Hub Sprocket - 1/2in Hex - 10T | STEP FILE ONSHAPE DRAWING |
| REV-21-3708 | #35 Hub Sprocket - 1/2in Hex - 11T | STEP FILE ONSHAPE DRAWING |
| REV-21-3709 | #35 Hub Sprocket - 1/2in Hex - 12T | STEP FILE ONSHAPE DRAWING |
| REV-21-3710 | #35 Hub Sprocket - 1/2in Hex - 16T | STEP FILE ONSHAPE DRAWING |
| REV-21-3711 | #35 Hub Sprocket - 1/2in Hex - 18T | STEP FILE ONSHAPE DRAWING |
| REV-21-3712 | #35 Hub Sprocket - 1/2in Hex - 20T | STEP FILE ONSHAPE DRAWING |
| REV-21-3713 | #35 Hub Sprocket - 1/2in Hex - 24T | STEP FILE ONSHAPE DRAWING |
| REV-21-3714 | #35 Hub Sprocket - MAXSpline - 16T | STEP FILE ONSHAPE DRAWING |
| REV-21-3715 | #35 Hub Sprocket - MAXSpline - 18T | STEP FILE ONSHAPE DRAWING |
| REV-21-3716 | #35 Hub Sprocket - MAXSpline - 20T | STEP FILE ONSHAPE DRAWING |
| REV-21-3717 | #35 Hub Sprocket - MAXSpline - 24T | STEP FILE ONSHAPE DRAWING |
| REV-21-3718 | #35 Billet Sprocket - 28T | STEP FILE ONSHAPE DRAWING |
| REV-21-3719 | #35 Billet Sprocket - 32T | STEP FILE ONSHAPE DRAWING |
| REV-21-3720 | #35 Billet Sprocket - 36T | STEP FILE ONSHAPE DRAWING |
| REV-21-3721 | #35 Billet Sprocket - 40T | STEP FILE ONSHAPE DRAWING |
| REV-21-3722 | #35 Billet Sprocket - 44T | STEP FILE ONSHAPE DRAWING |
| REV-21-3723 | #35 Billet Sprocket - 48T | STEP FILE ONSHAPE DRAWING |
| REV-21-3724 | #35 Billet Sprocket - 52T | STEP FILE ONSHAPE DRAWING |
| REV-21-3725 | #35 Billet Sprocket - 56T | STEP FILE ONSHAPE DRAWING |
| REV-21-3726 | #35 Billet Sprocket - 60T | STEP FILE ONSHAPE DRAWING |
| REV-21-3727 | #35 Billet Sprocket - 64T | STEP FILE ONSHAPE DRAWING |
| REV-21-3728 | #35 Billet Sprocket - 68T | STEP FILE ONSHAPE DRAWING |
| REV-21-3729 | #35 Billet Sprocket - 72T | STEP FILE ONSHAPE DRAWING |
| REV-21-3730 | #35 Billet Sprocket - 76T | STEP FILE ONSHAPE DRAWING |
| REV-21-3731 | #35 Billet Sprocket - 80T | STEP FILE ONSHAPE DRAWING |
